- +370 645 63033
- info@anilux.lt
- Chemijos g. 27C-62, LT-51332 Kaunas
Anilux hardware
Hinges
“Door hinges” are two-piece bendable nuts for windows made of window profiles. Made of extruded aluminium with stainless steel and nylon components. The nuts are supplied assembled with built-in inserts and allow horizontal and vertical adjustment of the door position. Installation is carried out without machining and fixing to the wing is by means of screws. Suitable for 14 mm tile groove window profiles.
The MONZA hinge for profiles with a Euro groove (groove 14x18 mm)
The two-section hinge is suitable for doors made from window profiles. The body and anchor plates are made from extruded aluminum, the adjustable bushing is made from Delrin®, the axis and screws are stainless steel, and the caps are made from nylon. It is supplied fully assembled with anchor plates.
Horizontal adjustments (+/- 2mm) and vertical adjustments (0/+4mm) are possible with the leaf closed, and compression adjustment (+/- 0.5mm) can be achieved by turning the bushing.
It is installed directly into the grooves on the profile using a counterplate provided in an assembled form, without the need for machining, and is fixed on the leaf with screws.
Door hinge HN-3302 (14mm rebate)
The two-part hinge is suitable for doors made from window profiles. The body and embedded plates are manufactured from extruded aluminum, the adjustable bushing is made from nylon, and the axis and screws are stainless steel, with caps also made from nylon.
Supplied fully assembled with embedded plates. Horizontal adjustments are possible (+/- 0.7mm), and gasket compression adjustment (+/- 0.3mm) via rotation of the bushing.
Installed directly into the profile slots using a counterplate supplied in an assembled state, with no need for machining, and fixed on the sash using screws.
Follow us:
2023 © Anilux.lt All rights reserved. Page created by Artix.lt
